Table of Contents
Advertisement
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
OFST2CL5
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
GAIN-CL0
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
GAIN2CL0
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED-CL-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
LED2CL-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
1
Adj CIS-ch5 offset:front,clr mode,600dpi
To adjust the offset value (black level) of the Scanner Unit (Front) on channel 5 in color mode with
600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (Front)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
1
Adj CIS gain level:front,clr mode,300dpi
To adjust the detection level (gain level) of the Scanner Unit (Front) in color mode with 300 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (Front)
Enter the setting value, and then press OK key.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC
1
Adj CIS gain level:front,clr mode,600dpi
To adjust the detection level (gain level) of the Scanner Unit (Front) in color mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (Front)
Enter the setting value, and then press OK key.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC
1
Adj pry lgt src lgt time: frt,clr,300dpi
To adjust the lighting time of the LED which is the primary light source of the Scanner Unit (Front)
in color mode with 300 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (Front)
Enter the setting value, and then press OK key.
0 to 2928
1648
COPIER> FUNCTION> CCD> CL-AGC
1
Adj pry lgt src lgt time: frt,clr,600dpi
To adjust the lighting time of the LED which is the primary light source of the Scanner Unit (Front)
in color mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (Front)
Enter the setting value, and then press OK key.
0 to 2928
2816
COPIER> FUNCTION> CCD> CL-AGC
410
8. Service Mode
Advertisement
Table of Contents
