Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
ST-PS
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PS
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PCL
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PCL
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PSLI5
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state display of PS function
To display installation state of PS function when disabling and then transferring the license.
When checking whether PS function is installed
1) Select ST-PS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PS.
When operation finished normally: OK!
According to the setting at shipment
Transfer license key dspl of PS function
To display transfer license key to use PS function when disabling and then transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-PS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PS.
24 digits
Install state display of PCL function
To display installation state of PCL function when disabling and then transferring the license.
When checking whether PCL function is installed
1) Select ST-PCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PCL.
When operation finished normally: OK!
According to the setting at shipment
Transfer license key dspl: PCL function
To display transfer license key to use PCL function when disabling and then transferring the
license.
- When replacing HDD
- When replacing the device
1) Select ST-PCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCL.
24 digits
Install state dspl: PS/LIPS4/LIPS LX: JP
To display installation state of PS/LIPS4/LIPS LX function (JP only) when disabling and then
transferring the license.
When checking whether PS/LIPS4/LIPS LX function (JP only) is installed
1) Select ST-PSLI5.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSLI5.
When operation finished normally: OK!
0
517
8. Service Mode
Advertisement
Table of Contents
