Canon imageRUNNER ADVANCE 715 series Service Manual page 508

Table of Contents

Advertisement

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
PH-D-SL2
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
JA-SBOX
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-DFAX
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set halftone process in text/photo mode
When copying or B&W scanning to Inbox in text/photo mode, halftone processing of the image
which reproduces gradation of text and photo judgment areas can be specified with this setting.
Set to 1 when jaggy occurs or request to use the same halftoning method (text area) as
conventional one is raised.
Set to 2 when moire occurs frequently or request to use the same halftoning method as
conventional B&W MFP method is raised.
Even 0 is set, TBIC is used for text judgment area and low screen ruling for photo judgment area
at the time of B&W Inbox scan.
The setting is disabled when the B&W Inbox scanning density is set to auto.
- When jaggy occurs on the edge of text or thin lines at copy output. Especially when jaggy occurs
in the text or thin lines (text in halftone dots) of the area where gradation in the halftone density is
expressed like photo, graphics, etc.
- When moire occurs frequently at the time of copy or B&W Inbox scan Especially when moire
frequently occurs in the area where gradation in the halftone density is expressed like photo,
graphics, etc. and this symptom is not alleviated with PH-D-SEL or sharpness adjustment
- When receiving a request to use the same halftoning method (text area) as the conventional one
(model with image area separation method) at copy output
- When receiving a request to use the same halftoning method (both text and photo areas) as the
conventional B&W MFP method at the time of copy or B&W Inbox output
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Low screen ruling (134 lines) is used for photo judgment area and high screen ruling (141 lines)
for text judgment area.
1: Low screen ruling is used for photo judgment area and TBIC for text judgment area.
2: TBIC is used for both photo and text judgment areas.
0
COPIER> OPTION> USER> PH-D-SEL
Setting of linking with Advanced Box:SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the link with Advanced Box when iW SAM is enabled.
When 1 is set, linking with Advanced Box is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of direct fax transmission: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the direct fax transmission when iW SAM is enabled.
When 1 is set, the direct fax transmission is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
498
8. Service Mode

Advertisement

Table of Contents
loading

Table of Contents