Canon imageRUNNER ADVANCE 715 series Service Manual page 461

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
CDS-UGW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
LOCLFIRM 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SDLMTWRN 1
FAX-INT 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Set to allow firmware update from UGW
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware from the UGW server.
When "1: Enabled" is set, Updater accepts the operation from the UGW server in cooperation with
CDS.
When allowing update of the firmware from the UGW server
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
CDS: Contents Delivery System
Set to allow firmware update by file
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to update the firmware from the remote UI using
a local file.
This update is executed as a measure for vulnerability in emergency situations.
When allowing the administrator to update the firmware using a file
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
[For customization]
Set FAX RX print interruption oprtn mode
To set the mode performing interruption operation of FAX reception print automatically.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
- Do not set this item while charge management (charging by Coin Manager, a device alone, etc.)
is used.
- During an ongoing job for which delivery setting (offset, stapling, etc.) is made, interruption
operation is performed between sets.
0 to 1
0: Normal, 1: Interruption operation mode
0
451
8. Service Mode