Canon imageRUNNER ADVANCE 715 series Service Manual page 575

Table of Contents

Firmware automatic update (USB Fax)

Detailed Discussions of Bit 0

Select a phone number to be indicated on the report after transmission is completed.

Caller's number: To display the caller's phone number on the report

Receiver's number: To indicate the phone number (CSI signal data) sent from the other party's machine on the report

Detailed Discussions of Bit 5

Select whether to prohibit the firmware automatic update for USB Fax.

Functional Construction

Check the sequential broadcast.

Redial function when transmission error occurs

Error report when sending process is canceled

Detailed Discussions of Bit 2

Select whether to display a confirmation message when entering destination for the sequential broadcast in order to prevent

the user from broadcasting by mistake.

Detailed Discussions of Bit 5

Select whether to use the redial function when outgoing transmission error occurs.

Detailed Discussions of Bit 7

Select whether to output an error report when the [Stop] key is pressed to cancel sending.

Functional Configuration

V.8 procedure at the caller side

V.8 procedure at the receiver side

V.8 late start at the caller side

V.8 late start at the receiver side

Fallback from the V.34 receiver side

Detailed Discussions of Bit 0

Select whether to execute V.8 procedure when making a call.

"No": V.8 procedure is not executed even if V.8 procedure is received from the receiver side, and the procedure starts from

8. Service Mode

Do not prohibited

Do not check

Do not output

Do not prohibit