Canon imageRUNNER ADVANCE 715 series Service Manual page 291

E315-0540-00
Detection Description
Remedy
E315-0541-00
Detection Description
Remedy
E315-0561-00
Detection Description
Remedy
E350-0000-00
Detection Description
Remedy
E350-0001-00
Detection Description
Remedy
E350-0002-00
Detection Description
Remedy
E350-0003-00
Detection Description
Remedy
E350-3000-00
Detection Description
Remedy
E351-0000-00
Detection Description
Remedy
E354-0001-00
Detection Description
Remedy
E354-0002-00
Detection Description
Remedy
E355-0001-00
Detection Description
Remedy
Image process device error
An error occurred during decompression of JPEG.
Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the Main Controller PCB.
Image process device timeout error
Decompression of JPEG was not completed within the specified period of time (120 sec).
Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the Main Controller PCB.
Image process device timeout error
Image transfer was not completed within the specified period of time (60 sec) after the start of
printing.
[Related parts]
- Harness between the Reader Controller PCB and Main Controller PCB
- Main Controller PCB
- Reader Controller PCB
[Remedy] Perform the following in the order while checking whether the error is cleared.
1. Reinstall the latest system software using SST or a USB flash drive.
2. Check/replace the related harness/cable, connector and parts.
System error
System error
Contact the service company office
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
Main Controller PCB communication error.
Check/replace the Main Controller PCB
System error
System error
Contact the service company office
System error
System error
Contact to the sales company.
System error
System error
Contact the service company office
281
7. Error/Jam/Alarm