Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
TRR-WRN1
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C1F-WRN1
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF Trn Roller replacement message
To set whether to display the message prompting to replace the Transfer Roller on the Control
Panel when the LF for life judgment reaches the Setting value (TRR-DLV)
.
When TRR-WRN1 is 1 and COPIER> OPTION> FNC-SW> TRR-DLV value is reached, the
Transfer Roller life detection is performed. When the Transfer Roller reaches its life, the Transfer
Roller replacement message "Transfer Roller needs to be replaced." is displayed.
When the message is displayed, perform the following procedure.
1)
Replace the Transfer Roller.
2)
Clear the transfer roller counter.
When displaying the Transfer Roller replacement message
1)
Enter the setting value, and then press OK key.
2)
Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
CST1 Fd Rol Replacement 1 dspl switch
To set whether to display the message prompting to replace the Cassette Roller on the Control
Panel when the LF for life judgment reaches the Setting value (xxF-DLV)
.
When C1F-WRN1 is 1 and COPIER> OPTION> FNC-SW> C1F-DLV value is reached, the
Cassette Feed Roller life detection is performed. When the Cassette Transfer Roller for the target
paper source reaches its life, the Cassette Roller replacement message for the target paper source
"Cassette Roller needs to be replaced." is displayed.
When the message is displayed, perform the following procedure.
1)
Replace the Cassette Roller for the target paper source.
2)
Clear the Cassette Transfer Roller Counter for the target paper source.
When displaying the Cassette Roller replacement message
1)
Enter the setting value, and then press OK key.
2)
Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
465
8. Service Mode
Advertisement
Table of Contents
