After Replacing Touch Panel/Control Panel Cpu Pcb/Lcd Unit - Canon imageRUNNER ADVANCE 715 series Service Manual

Table of Contents

Advertisement

8. Execute the following service modes to adjust the reading start position as needed.
COPIER > ADJUST > ADJ-XY > ADJ-S: Adjustment of the Reader shading position
COPIER > ADJUST > ADJ-XY > ADJ-Y-DF: Adjustment of the reading start position (DADF, front side, horizontal scanning
direction)
COPIER > ADJUST > ADJ-XY > ADJY-DF2: Adjustment of the reading start position (DADF, back side, horizontal
scanning direction)

After Replacing Touch Panel/Control Panel CPU PCB/LCD Unit

■ Works After Replacement
Execute the following service mode to adjust the Touch Panel only when replacing a single part.
COPIER > FUNCTION > PANEL > TOUCHCHK
CAUTION:
If the coordinate on the Touch Panel is not correct, adjustment of the Touch Panel may not be performed. In that case, the
Touch Panel can be adjusted by performing the following menu operation using hardware keys.
• Press the [Settings/Registration] button on the service mode top screen, and then press [5] key 3 times.
240
5. Adjustment

Advertisement

Table of Contents
loading

Table of Contents