Canon imageRUNNER ADVANCE 715 series Service Manual page 507

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
CTCHKDSP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DFLT-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
USBR-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
POL-SCAN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Display/hide of counter print
To set whether to display or hide "Print List" on the Counter Check screen.
Model name, model number information, counter check date and counter information can be output
as a total count management report.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
Tgt Auto Adj Gradation initial dspl set
To set the initial display of the target full adjustment/quick adjustment items on [Auto Adjust
Gradation] in [Settings/Registration].
This setting is enabled when EFI Controller is connected or only on the copy model which Adobe
PS/PDF is available.
When 0 is set, the target adjustment item is not displayed.
When 1 to 3 is set, the target adjustment items (Copy/Printer/Both) are displayed and one of them
is selected.
When switching the initial display at the time of Auto Adjust Gradation
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Adjustment item is not displayed.
1 to 3: Adjustment item is displayed.
0
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation
ON/OFF USB infrared devc MEAP driver use
To set whether to display "Use MEAP Driver for USB Infrared Device" in [Settings/Registration].
When 1 is set, whether to use MEAP driver can be selected on USB Settings screen.
When allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Preferences> External Interface> USB Settings> Use MEAP Driver for USB Infrared Device
ON/OFF Rights Management Server set dspl
When "1: Display" is set, the Rights Management Server function screen is displayed.
While the Rights Management Server function is a standard feature, it is possible to hide if not
necessary.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
It differs according to the location.
497
8. Service Mode