Table of Contents
Advertisement
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P
USBH-PRT
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
RPT-FILE
Detail
Use Case
Adj/Set/Operate Method
Supplement/Memo
RPT2USB
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
TNRB-PRT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
■ SYSTEM
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > SYSTEM
DOWNLOAD
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
1
Output of USB device information report
To output information of the connected USB device in the form of a report.
Text data is saved in HDD as a file (USBH-PRT-RPT.TXT).
When outputting information of the USB device in the form of a report
Select the item, and then press OK key.
Be sure to use A4/LTR size plain paper/recycled paper.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-P> RPT-FILE
1
Output of report print file
To save various service reports in HDD as a file.
The files can be obtained using PC to which SST has been installed or USB memory device after
starting the machine in download mode.
When obtaining the service report as a file instead of printing the report out
Select the item, and then press OK key.
File size: Approx. 1 MB at a maximum
1
Write serv rpt file to USB flash drive
To store the report file of service mode saved in HDD by RPT-FILE to a USB flash drive.
When storing the report file of service mode to a USB flash drive
Select the item, and then press OK key.
COPIER> FUNCTION> MISC-P> RPT-FILE
1
Output of Toner Container ID report
To output the ID of the Toner Container in the form of a report.
Text data is saved in HDD as a file (TNRB-PRT-RPT.TXT).
When checking the ID of the Toner Container
Select the item, and then press OK key.
12-digit alphanumeric
COPIER> FUNCTION> MISC-P> RPT-FILE
1
Shift to download mode
To make the machine enter the download mode and wait for a command.
Perform downloading by SST or a USB flash drive.
At upgrade
1) Select the item, and then press OK key.
2) Perform downloading by SST or a USB flash drive.
Do not turn OFF/ON the power during downloading.
SST: Service Support Tool
442
8. Service Mode
Advertisement
Table of Contents
