Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
CDS-LVUP
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
AMSOFFSW
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
UA-OFFSW
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Set to allow CDS periodical update
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to perform periodical update linked with CDS.
When 1 is set, setting of periodical update can be made in Settings/Registration menu/via remote
UI.
When 2 is set, setting of periodical update can be made on the Updater screen in service mode.
When allowing the user/service technician to perform periodical update
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Prohibited periodical update
1: Display the periodical update setting screen in Settings/Registration menu/on remote UI
2: Display the periodical update setting screen on the Updater in service mode
It differs according to the location.
Updater
Management Settings> License/Other> Register/Update Software> Periodical Update
CDS: Contents Delivery System
Enabling of AMS mode
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To enable the AMS mode.
When 0 is set, the AMS mode is enabled. The AMS mode is automatically enabled when the
following 2 conditions are satisfied.
- AMS license for an iR option is installed.
- AMS-supported Login application (User Authentication, etc.) is activated.
When enabling AMS mode
1) Check that AMS-supported Login application is activated.
2) Enter 0, and then press OK key.
3) Turn OFF/ON the main power switch.
4) Check that [Role Management] is displayed on remote UI.
0 to 1
0: AMS mode enabled, 1: AMS mode disabled
1
COPIER> OPTION> LCNS-TR> ST-AMS
(Remote UI) User Management> Authentication Management> Role Management
AMS: Access Management System
In AMS mode, [Role Management] is displayed on remote UI.
ON/OFF of unified auth function
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of the Unified Authentication function.
Set 0 when not preferring to use the Unified Authentication function because of security concern.
Upon user's request (not to use the Unified Authentication function)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: ON, 1: OFF
0
Unified Authentication: A function with which it is considered that login authentication under it is
performed by logging in it using SSO-H.
452
8. Service Mode
Advertisement
Table of Contents
