Canon imageRUNNER ADVANCE 715 series Service Manual page 514

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
JA-WIFI 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C-P-SIZE 2
MF-FEED 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
TNRBEXGR 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
DUTL-SW 2
INSTDT-Y 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Setting of SAM Wi-Fi direct print
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow Wi-Fi direct print when iW SAM is enabled.
Wi-Fi direct print cannot be used when iW SAM is enabled. However, when 1 is set, it can be used.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
[For customization]
Manual restart w/OK key: no ppr on MP Tr
If the following three conditions are satisfied, pickup is not restarted automatically when placing
paper on the Multi-purpose Tray.
1. The setting of "Preferences> Paper Settings> Multi-Purpose Tray Defaults" is "Fixed".
2. The job type is PDL.
3. The setting value of this service mode is 1.
4. Paper is placed at occurrence of no paper on the Multi-Purpose Tray.
Upon user's request. Use this item for customization for Aeon during application of service mode.
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
Preferences> Paper Settings> Multi-Purpose Tray Defaults
ON/OFF oprtn hold: Tonr Cont early rplce
To set whether to hold the operation when the Toner Container is prematurely replaced although
it can still be used.
When a new Toner Container is inserted while 1 is set, a message is displayed and the operation
is held.
The message disappears by changing the Toner Container back to the one before replacement
or by changing the setting value of this item to 0 and then restarting the machine.
When preventing from replacing the Toner Container prematurely
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
The message does not disappear unless the Toner Container is changed back to the one before
the replacement. Be sure to get approval from the user by telling the above specifications before
making the setting.
0 to 1
0: OFF, 1: ON
0
For R&D
Register installation date info: year
To set the information on the installation date (year).
- At installation
- When replacing the HDD
Enter the setting value, and then press OK key.
0 to 2038
0
COPIER>FUNCTION>INSTALL>INSTDTST
504
8. Service Mode