Table of Contents
Advertisement
SITUATION Mode
Situation mode has been implemented in this machine to improve workability and searchability at the site. This mode makes it
possible to easily use the service mode appropriate for the scene at the site.
The following items are available in situation mode.
• Install:
To be referred at installation of the machine.
• Troubleshooting:
To be referred at problem solving.
• Parts Replacement:
To be referred at parts replacement.
• Major Adjustment:
To be referred at installation of the machine.
• Sensor Check:
To be referred at checking of the sensor.
• Part Check:
To be referred at operation check of the part.
The following three points are made available depending on each situation:
• Display of related service mode that requires adjustment
• Display of causes and remedies
• Display of related images
■ How to Use Sensor Check
In the Sensor Check of situation mode, the target electrical component can be searched. The operation procedure is shown
below.
1. Start service mode.
346
8. Service Mode
Advertisement
Table of Contents
