Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
UI-CUSTM
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SDTM-DSP
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
DF-DSP
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
PRCLNSW
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
UI-PPA
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
ON/OFF of custom menu screen display
To set ON/OFF of the custom menu screen display on the Control Panel.
When not displaying the custom menu screen on the Control Panel
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
ON/OFF of auto shutdown shift time dspl
To set whether to display [Auto Shutdown Time] in [Settings/Registration].
Upon user's request
Enter the setting value, and then press OK key.
When 0 is set, automatic shutdown is not executed.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Timer/Energy Settings> Auto Shutdown Time
ON/OFF ADF Maintenance Kit cntr ini scrn
To set whether to display "ADF Maintenance Kit" on the counter initialization screen in [Settings/
Registration].
When the user does not replace the parts
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
0
Adjustment/Maintenance> Maintenance> Initialize After Replacing Parts> ADF Maintenance Kit
Fixing Pressure Roll clean mssg dspl
To set whether to display the message prompting to clean the Fixing Pressure Roller.
The timing to display the message can be adjusted in PR-CLN.
When a soiled image occurs because toner adheres to the Fixing Pressure Roller
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
0
COPIER> OPTION> CLEANING> PR-CLN
ON/OFF of PPA screen display
To set whether to display PPA-related information on the Control Panel or remote UI.
The setting is linked with LGCY-SCP. When LGCY-SCP is set to 0, the setting of this item becomes
1. When LGCY-SCP is set to 1, the setting of this item becomes 0.
When not displaying PPA-related information on the screen
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0 (non PPA-installed machine)/1 (PPA-installed machine)
COPIER> OPTION> USER> LGCY-SCP
PPA (Personal Print Application): A function to hold print job. It contains the secured print function.
462
8. Service Mode
Advertisement
Table of Contents
