Table of Contents
Advertisement
3. Press [Start].
If the user has not given any instruction on which item in the deletion mode should be used, select the default "Once with 0
(Null) Data".
NOTE:
• When all the data are initialized, the user data on the HDD and the user data on the Flash PCB are deleted. For the items to
be deleted, refer to the backup list.
• Performing "Initialize All Data" turns auto gradation adjustment values and TPM settings to OFF. Therefore, to enable normal
operation the next time, the operation performed at installation is necessary.
• Performing Initialize All Data/Settings does not delete the license of the system option.
Report output upon completion of Initialize All Data/Settings
A report is output after "Initialize All Data/Settings" is completed.
Consider using this report to provide to user as a material to inform of work details when executing Initialize All Data/Settings
upon user's request.
Operation after Initialize All Data/Settings
The machine is started normally at restart after Initialize All Data/Settings without displaying the message (Turn OFF the main
power supply on the right side of the machine) on the screen to prompt shutdown.
The report is output after startup.
<< Initialize All Data/Settings Report >>
Serial Number
Device Name
Overwrite Method for Deletion Mode
The following data stored in the device has been completely erased.
******************************
*** System Information ***
******************************
- Data stored in the temporary data area
- User generated data
- Settings under Settings/Registration (restored to factory defaults)
ZZZ99999
iR-ADV XXXX (iAXXXX)
Once with Random Data (*1)
640
Removal
Advertisement
Table of Contents
