Canon imageRUNNER ADVANCE 715 series Service Manual page 339

31-0106
A. Operation / B. Cause /
C. Remedy
31-0116
A. Operation / B. Cause /
C. Remedy
31-0126
A. Operation / B. Cause /
C. Remedy
31-0136
A. Operation / B. Cause /
C. Remedy
31-01F1
A. Operation / B. Cause /
C. Remedy
31-01F2
A. Operation / B. Cause /
C. Remedy
31-01F3
A. Operation / B. Cause /
C. Remedy
31-01F4
A. Operation / B. Cause /
C. Remedy
31-01F5
A. Operation / B. Cause /
C. Remedy
31-01F6
A. Operation / B. Cause /
C. Remedy
34-0050
A. Operation / B. Cause /
C. Remedy
37-0001
A. Operation / B. Cause /
C. Remedy
37-0002
A. Operation / B. Cause /
C. Remedy
37-0003
A. Operation / B. Cause /
C. Remedy
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
For R&D
-
Laser Scanner EEPROM checksum alarm
An error in data in the EEPROM installed in the Laser Scanner PCB was detected.
Detection condition/timing:
When the DCON is started, data in the EEPROM of the Laser Scanner is retrieved.
[Related parts]
- Laser Driver PCB
- Harness between the DC Controller PCB and the Laser Driver PCB
Remedy:
[Remedy] Check/replace the related parts.
For R&D
-
For R&D
-
For R&D
-
329
7. Error/Jam/Alarm