Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
SVC-SRA
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
UFOS-DSP
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Supplement/Memo
■ NETWORK
COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
RAW-DATA
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Display/hide of DBS installation button
To set whether to display the [Install Data Backup Service] button on the CDS Updater screen
(user mode/service mode).
When switching to install/not to install the Data Backup Service via network
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Depending on the setting value, display when entering from Settings/Registration and that from
service mode differ.
0 to 2
0: Hide (Hide user mode/service mode)
1: Display only service mode (Hide user mode)
2: Display all (Display user mode/service mode)
It differs according to the location.
Service Mode> Updater> Install Data Backup Service
Management Settings> License/Other> Register/Update Software> Install Data Backup Service
Display/hide of uniFLOW Setup
Service mode to switch to display or hide [uniFLOW Setup].
When to switch to display or hide [uniFLOW Setup]
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
It differs according to the location.
Main Menu > uniFLOW Setup
uniFLOW : The name of the product destined for China is "mdsFLOW".
Setting of received data print mode
To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data or image processing in the
case of trouble with received image.
When received image trouble occurs
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Be sure to change the value back to 0 after recovering from the problem.
0 to 1
0: Normal print operation, 1: Print with original data without image processing
0
466
8. Service Mode
Advertisement
Table of Contents
