Ipfax Setting - Canon imageRUNNER ADVANCE 715 series Service Manual

IPFAX Setting

■ IPFAX
● BASIC N
Bit
2 Session control reception timeout (sec.)
20 Reception start delay time (sec.)
21 BYE sending delay time at transmission (x10 msec.)
22 BYE receiving delay time at transmission (x10 msec.)
● NETA NUM
Bit
1 T0 timer(Timer C) for IPFAX(sec.)
● NETC NUM
Bit
1 SW for adjusting the speed at VoIPGW transmission [%]
2 VoIPGW buffer size [byte]
3 Packet division size [byte]
4 Number of VoIPGW buffer reset frames at ECM
* At ECM transmission, when frames of the number of this NUM value have
been transmitted, the next frames will be transmitted after the VoIPGW buffer
becomes empty.
● T.38 Bit Setting
SW01
Bit
1 German mode is effective during T.38 communication.
2 T.38 significant bit of DIS (bit123) is ignored.
(When this SW is effective, the other party's machine is regarded as IPFAX even if DIS
bit123 is 0.)
3 Transmission ECM = OFF setting
4 Reception ECM = OFF setting
● T.38 NUM Setting
Bit
1 High-speed flag sending time of ECM mode for IPFAX (x10 msec.).
2 WAIT time from the close of T.38 to the close of SIP: Unit; second
(However, the setting becomes 2 seconds even if the setting is changed to 2
or more. ).
Function
Function
Function
Function
Function
574
8. Service Mode
Setting range
0 to 9999 (0*)
0 to 9999 (0*)
0 to 9999 (0*)
0 to 9999 (0*)
Setting range
0 to 9999 (55*)
Setting range
0 to 9999*
However, the value is fixed in the case of
ECM, and is corrected by adding 5 %.
0 to 9999*
However, when the value is 0, it is internally
interpreted as 200.
0 to 9999*
However, when the value is 0, it is internally
interpreted as 66.
0 to 9999*
However, when the value is 0, it is internally
interpreted as 16.
Setting range
1
Effective Invalid *
Ignore Not ignore
Effective Invalid *
Effective Invalid *
Setting range
0 to 9999 (0*)
0 to 9999 (1*)
0