Table of Contents
Advertisement
NFC Kit-C1
Points to Note when Installing
• Do not touch the sensor and PCB components of the
Control Panel.
• The parts removed in "Removing the Control Panel" will
be used in "Installing the Control Panel".
• Although pictures or illustrations used for explanation
may differ from the actual things, the procedure is the
same.
Installation Outline Drawing
Checking the Contents
1x
1x
1x
<Others>
• Including guides
1x
1x
TP; M3x4
1x
591
Essential Items to Be
Performed Before Installation
• Turn OFF the main power of the host machine, and
disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the
power plug of the host machine, it may cause
electrical shock.
• If disconnecting the power plug without
turning OFF the main power, it may cause
damage of the machine.
• When turning OFF the main power, follow the below
procedure.
1. Turn OFF the main power switch of the host
machine.
2. The display in the Control Panel and the lamp of the
main power are turned off.
Installation procedure
■ Removing the Control Panel
1.
9. Installation
Advertisement
Table of Contents
