Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
TNRB-SW
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
USBH-DSP
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
USBM-DSP
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
USBI-DSP
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Display/hide of Toner Container counter
To set whether to display the Toner Container counter on the Counter Check screen.
When showing the Toner Container counter to the user
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 4
0: Hide, 1: Display (70s only), 2: Not used, 3: Display (70s/180s), 4: Display (60s/70s/180s)
It differs according to the location.
60s: The number of premature replacements of the Toner Container
70s: The number of installations of a new Toner Container
80s: The number of installations of a new Toner Container + the number of premature
replacements
180s: The number of installations of unidentified Toner Container
ON/OFF of USB host use display
To set whether to display "Preferences> External Interface> USB Settings> Use USB Host".
By selecting "1: Display", whether to use USB host on USB Settings screen can be selected.
When switching to display or hide "Use USB Host" on USB Settings screen
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Preferences> External Interface> USB Settings> Use USB Host
ON/OFF USB ex-mem device MEAP driver use
To set whether to display [Use MEAP Driver for USB Storage Device] in [Settings/Registration].
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
When not allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When setting 0, be sure to make the setting after the specified setting is completed.
0 to 1
0: OFF, 1: ON
1
Preferences> External Interface> USB Settings> Use MEAP Driver for USB External Device
ON/OFF USB input device MEAP driver use
To set whether to display [Use MEAP Driver for USB Input Device] in [Settings/Registration].
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
When not allowing the user administrator to select whether to use the MEAP driver
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When setting 0, be sure to make the setting after the specified setting is completed.
0 to 1
0: OFF, 1: ON
1
Preferences> External Interface> USB Settings> Use MEAP Driver for USB Input Device
496
8. Service Mode
Advertisement
Table of Contents
