Table of Contents
Advertisement
E066-0001-05
Detection Description
Remedy
E100-0004-05
Detection Description
Remedy
E110-0001-05
Detection Description
Remedy
E110-0002-05
Detection Description
Remedy
E196-0001-05
Detection Description
Remedy
E196-0002-05
Detection Description
Remedy
E197-0001-05
Detection Description
Remedy
E197-0002-05
Detection Description
Remedy
Environment Sensor Abnormal Warning
When the Environment Sensor detects an AD value of 0 to 60 or 220 to 225
[Related parts]
- Environment Sensor (TH4200)
Laser Scanner error
The light intensity settings to the Laser Driver failed.
[Related parts]
- Laser Scanner Unit
- Harness between the Laser Scanner Unit and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Laser Scanner Motor startup error
The startup of the Laser Scanner Motor does not complete.
[Related parts]
- Laser Scanner Unit
- Harness between the Laser Scanner Unit and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Laser Scanner Motor rotation error
A BD Detection error occurs during the operation of the Laser Scanner Motor.
[Related parts]
- Laser Scanner Unit
- Harness between the Laser Scanner Unit and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Main ROM Write/Read error
A Main ROM Write/Read error occurs at startup.
[Related parts]
- DC Controller PCB
[Remedy]
1. Install firmware
2. Check/replace the related harness/cable, connector and parts.
Option ROM Write/Read error
An Option ROM Write/Read error occurs at startup.
[Related parts]
- Harness between the DC Controller PCB and the Finisher Controller PCB
- Harness between the DC Controller PCB and the OP Cassette Controller PCB
- Finisher Controller PCB
- OP Cassette Controller PCB
- DC Controller PCB
[Remedy]
1. Install firmware
2. Check/replace the related harness/cable, connector and parts.
Internal communication error
A communication error occurred between CPU and ASIC.
[Related parts]
- Laser Scanner Unit
- Harness between the Laser Scanner Unit and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Engine Firmware Error
An engine firmware different from this product was detected.
Installation of a proper PW.
275
7. Error/Jam/Alarm
Advertisement
Table of Contents
