Canon imageRUNNER ADVANCE 715 series Service Manual page 529

COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
ST-PSPCL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PSPCL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PCLUF 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PCLUF 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PSLIP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state dspl of PS/PCL function
To display installation state of PS/PCL function when disabling and then transferring the license.
When checking whether PS/PCL function is installed
1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSPCL.
When operation finished normally: OK!
According to the setting at shipment
Transfer license key dspl of PS/PCL func
To display transfer license key to use PS/PCL function when disabling and then transferring the
license.
- When replacing HDD
- When replacing the device
1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCL.
24 digits
Install state dspl: PCL/UFR II function
To display installation state of PCL/UFR II function when disabling and then transferring the
license.
When checking whether PCL/UFR II function is installed
1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PCLUF.
When operation finished normally: OK!
According to the setting at shipment
Trns license key dspl of PCL/UFR II func
To display transfer license key to use PCL/UFR II function when disabling and then transferring
the license.
- When replacing HDD
- When replacing the device
1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCLUF.
24 digits
Install state dspl of PS/LIPS4 func: JP
To display installation state of PS/LIPS4 function (JP only) when disabling and then transferring
the license.
When checking whether PS/LIPS4 function (JP only) is installed
1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSLIP.
When operation finished normally: OK!
According to the setting at shipment
519
8. Service Mode