Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
MIB-NVTA
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
MIB-EXT
1
SVC-RUI
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
LCDSFLG
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
RFC-compatible character stringMIB write
As default, MIB object which NVT-ASCII can be written exists in order to link with local UI entry
value. This violates RFC order, so a problem like garbled 2-byte characters may occur in the SNMP
monitoring system, such as other vendor's MPS.
Whether to allow writing of non-RFC-compatible character strings in MIB can be set using this
item.
When 1 is set, only the character strings which are strictly compatible with RFC are written. (Writing
operation is executed from the SNMP manager.) It is not linked with local UI.
Upon user's request (operation with RFC-compatible system)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Compatible in a conventional manner, 1: RFC-compatible, 2 to 3: Not used
0
RFC: Document of internet-related technical standards
NVT-ASCII: Network Virtual Terminal-ASCII
For R&D
Enabling of remote UI func for servicing
To set whether to enable the remote UI function for servicing (not provided to end users).
When 0 is set, the remote UI function is disabled.
When setting a value other than 0, the remote UI function is enabled and its value will be used as
the password to use the function.
When preferring to use the import function of background image file of main menu/custom menu
Enter the setting value (other than 0), and then press OK key.
0 to 65535
0
Enabling of local CDS server
To set whether to use the local CDS server.
When CDS-FIRM is 1, this setting is enabled.
When using the local CDS server
Enter the setting value, and then press OK key.
0 to 1
0: Disabled, 1: Enabled
0
COPIER> OPTION> FNC-SW> CDS-FIRM
Management Settings> License/Other> Register/Update Software> Software Management
Setting> Setting
When local CDS is used, iW EMC/MC device firmware update plug-in is required.
453
8. Service Mode
Advertisement
Table of Contents
