Canon imageRUNNER ADVANCE 715 series Service Manual page 496

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
COUNTER3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER4 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER5 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
COUNTER6 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DATE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Setting of software counter 3
To set counter type for software counter 3 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 4
To set counter type for software counter 4 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 5
To set counter type for software counter 5 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
It differs according to the location.
Setting of software counter 6
To set counter type for software counter 6 on the Counter Check screen.
Upon user/dealer's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 999
0: No registration
0
Setting of data/time display format
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set date/time display format according to the country or region.
After the display format is set with this mode, the order of date is reflected to the followings:
Preferences> Timer/Energy Settings> Date/Time Settings, and report output.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
It differs according to the location.
Preferences> Timer/Energy Settings> Date/Time Settings
486
8. Service Mode