Canon imageRUNNER ADVANCE 715 series Service Manual page 446

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
PWD-CLR 1
Detail
Use Case
Adj/Set/Operate Method
ADRS-BK 1
Detail
Use Case
Adj/Set/Operate Method
Caution
CNT-MCON 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
Supplement/Memo
CNT-DCON 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
MMI 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
Clear of system administrator password
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the password of the system administrator set in [Settings/Registration].
When clearing the password of the system administrator
Select the item, and then press OK key.
Clear of address book
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the address book data.
When clearing the address book data
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
The address book data is cleared after the main power switch is turned OFF/ON.
Clear of Main Controller service counter
To clear the service counter counted by the Main Controller PCB.
When clearing the service counter counted by the Main Controller PCB
Select the item, and then press OK key.
COPIER> COUNTER
See COUNTER for the target counter.
Clear of DC Controller service counter
To clear the service counter counted by the DC Controller PCB.
When clearing the service counter counted by the DC Controller PCB
Select the item, and then press OK key.
COPIER> COUNTER
Clear Settings/Registration setting VL
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the Settings/Registration setting values.
- Preferences (excluding values for Paper Type Management Settings)
- Adjustment/Maintenance
- Function Settings
- Set Destination (excluding Address Lists)
- Management Settings (excluding Department ID Management)
When clearing various setting values of [Settings/Registration]
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
- The setting value is cleared after the main power switch is turned OFF/ON.
- If this item is executed while a login application other than User Authentication is running, it
switched to User Authentication after reboot. Set the login application using SMS as needed.
SMS (Service Management Service): An application for management which can be used on
remote UI.
436
8. Service Mode