Canon imageRUNNER ADVANCE 715 series Service Manual page 536

COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
TR-TCFNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Additional Functions
Mode
TR-FRWEB 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-FRWEB 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ST-HCD 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-HCD 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Trn lic key dspl:PCL Asian Font,trad CHI
To display transfer license key to use PCL Asian Font (traditional Chinese) when disabling and
then transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-TCFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-TCFNT.
24 digits
Function Settings> Printer> Output Report> PCL> Font List
Trn lcns key dspl:Web Access SW,free ver
To display transfer license key to use the free version of Web Access Software when disabling
and then transferring the license of it.
- When replacing HDD
- When replacing the device
1) Select ST-FRWEB.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-FRWEB.
24 digits
Instl state dspl:Web Access SW, free ver
To display installation state of the free version of Web Access Software when disabling and then
transferring the license of it.
When checking whether the free version of Web Access Software is installed
1) Select ST-FRWEB.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-FRWEB.
When operation finished normally: OK!
According to the setting at shipment
Inst state dspl: IEEE2600 Security Kit
To display installation state of Security Kit for IEEE2600 when disabling and then transferring the
license.
When checking whether the Security Kit for IEEE2600 is installed
1) Select ST-HCD.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-HCD.
When operation finished normally: OK!
According to the setting at shipment
Trn lcns key dspl: IEEE2600 Security Kit
To display transfer license key to use the Security Kit for IEEE2600 when disabling and then
transferring the license of it.
- When replacing HDD
- When replacing the device
1) Select ST-HCD.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-HCD.
24 digits
0
526
8. Service Mode