Table of Contents
Advertisement
8. Service Mode
FEEDER (ADF service mode) > OPTION (Specification setting mode)
R-OVLPLV
2
Set DADF double feed dtct threshold VL
Detail
To set the threshold value at which the Double Feed Sensor of the DADF judges whether papers
are double fed.
Decrease the value if single feed of paper is incorrectly detected as double feed.
Increase the value if double feed of paper is incorrectly detected as single feed.
Use Case
When double feed is incorrectly detected with special paper not defined in the specifications
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Caution
In the case of highlands, be sure to set R-ATM in advance.
Display/Adj/Set Range
-3 to 3
Default Value
0
Related Service Mode
FEEDER> OPTION> R-ATM
552
Advertisement
Table of Contents
