Canon imageRUNNER ADVANCE 715 series Service Manual page 426

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
LED2BW-2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
GAIN-BW1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
GAIN-BW2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Adj sec lgt src lgt time: bck,B&W,600dpi
To adjust the lighting time of the LED which is the secondary light source of the Scanner Unit (for
back side)
in B&W mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for back side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 2928
1312
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS gain level:front,B&W mode,600dpi
To adjust the detection level (gain level)
of the Scanner Unit (for front side)
in Black & White mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for front side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS gain level:bck,B&W mode,600dpi
To adjust the detection level (gain level)
of the Scanner Unit (for back side)
in Black & White mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for back side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 255
0
COPIER> FUNCTION> CCD> CL-AGC
416
8. Service Mode