Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
ST-XPS
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-XPS
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-2600
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-2600
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-OPFNT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state dspl of Direct Print XPS
To display installation state of Direct Print XPS when disabling and then transferring the license.
When checking whether Direct Print XPS is installed
1) Select ST-XPS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-XPS.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of Direct Print XPS
To display transfer license key to use Direct Print XPS when disabling and then transferring the
license.
- When replacing HDD
- When replacing the device
1) Select ST-XPS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-XPS.
24 digits
Instal state dspl: IEEE2600.1 scrty func
To display installation state of the IEEE2600.1 security function when disabling and then
transferring the license.
When checking whether the IEEE2600.1 security function is installed
1) Select ST-2600.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-2600.
When operation finished normally: OK!
According to the setting at shipment
Trn lcns key dspl: IEEE2600.1 scrty func
To display transfer license key to use IEEE2600.1 security function when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-2600.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-2600.
24 digits
Install state display of PCL Font Set
To display installation state of PCL Font Set when disabling and then transferring the license.
When checking whether PCL Font Set is installed
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-OPFNT.
When operation finished normally: OK!
According to the setting at shipment
523
8. Service Mode
Advertisement
Table of Contents
