Canon imageRUNNER ADVANCE 715 series Service Manual page 441

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > INSTALL
BLE-USE 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
INSTDTST 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
■ CCD
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CCD
DF-WLVL1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
DF-WLVL2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
ON/OFF of BLE module option
To set whether to enable the installed BLE module option.
Set 1 when using the BLE module option. The BLE setting screen is displayed in [Settings/
Registration].
When installing the BLE module option
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not set 1 when the BLE module option is not installed.
0 to 1
0: OFF, 1: ON
0
Batch set installation date info: YMDHN
Information on the current date and time is entered collectively in YMDHN of INSTDT by pressing
INSTDTST.
At installation
Select the item, and then press OK key.
COPIER>OPTION>USER>INSTDT-Y
COPIER>OPTION>USER>INSTDT-M
COPIER>OPTION>USER>INSTDT-D
COPIER>OPTION>USER>INSTDT-H
COPIER>OPTION>USER>INSTDT-N
White level adj in book mode: color
To adjust the white level for copyboard scanning automatically by setting the paper which is usually
used by the user on the Copyboard Glass.
- When replacing the Copyboard Glass
- When replacing the Scanner Unit (Front)
- When replacing the SATA Flash PCB
- When clearing the Reader-related RAM data
1) Set a paper on the Copyboard Glass.
2) Select the item, and then press OK key.
Be sure to execute DF-WLVL2 in a row.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> CCD> DF-WLVL2
White level adj in DADF mode: color
To adjust the white level for DADF scanning automatically by setting the paper which is usually
used by the user on the DADF.
- When replacing the Copyboard Glass
- When replacing the Scanner Unit (Front)
- When replacing the SATA Flash PCB
- When clearing the Reader-related RAM data
1) Set paper on the DADF.
2) Select the item, and then press OK key.
Be sure to execute this item after DF-WLVL1.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> CCD> DF-WLVL1
431
8. Service Mode