Option (Specification Setting Mode) - Canon imageRUNNER ADVANCE C3330 Series Service Manual

OPTION (Specification setting mode)

■ FNC-SW
COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
MODEL-SZ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SCANSLCT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DH-SW 2
SENS-CNF 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Fix magnifictn dspl&DADF orgnl dtct size
To set the fixed magnification ratio display and the original detection size with DADF.
It is set automatically at the time of installation of the Reader according to the location.
- Upon user's request (original consists of mixed media (AB/Inch configuration))
- When using Chinese paper (8K/16K paper)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South
America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania,
South America
It differs according to the location.
COPIER> OPTION> FNC-SW> MODELSZ2, KSIZE-SW
ON/OFF of scan area calculate function
To set ON/OFF of the function to calculate scanning area from the specified paper size.
When the paper size is larger than the original size, selecting ON reduces productivity because
the scanning area gets larger.
When matching the scanning area with the paper size
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (calculated from the detected original size)
1: ON (calculated from the specified paper size)
0
For R&D
Setting of original detection size
To set original detection size according to AB configuration/Inch configuration/A configuration.
Select 1 (Inch configuration) for Inch configuration/A configuration machine.
- When replacing the Scanner Unit
- When clearing the RAM data of the Reader Unit
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: AB configuration, 1: Inch configuration
0
834
8. Service Mode