Canon imageRUNNER ADVANCE 715 series Service Manual page 269

1. Execute the following service mode to save report files to the HDD.
COPIER > Function > MISC-P > RPT-FILE
2. Execute the following service mode with the USB device connected to the host machine to collect the report stored
in the HDD into the USB device.
COPIER > Function > MISC-P > RPT2USB
■ Collection of Log
Save the Sublogs stored in the host machine to a USB device or a PC with SST installed.
The procedure for storing Sublogs to a USB device differs from that for storing Sublogs to a PC
● Collecting into a USB Device
To save (collect) Sublogs to a USB device, perform the procedure shown below to collect the logs.
If SST is used to save (collect) Sublogs to a PC, this work is not necessary.
CAUTION:
If the log is stored multiple times to the USB flash drive on the host machine with the platform version 3.6 or earlier, make
sure to move the stored log file to a different location each time.
Log files are stored in the root directory of USB flash drive. If multiple files are stored, the file, "LOGLIST.txt" is overwritten.
Note that on the host machine with the platform version 3.7 later, specifications are changed and this file is not overwritten.
1. Connect the USB flash drive to the machine.
259
6. Troubleshooting