Canon imageRUNNER ADVANCE 715 series Service Manual page 498

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
JOB-INVL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TAB-ROT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PR-PSESW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IDPRN-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CPRT-DSP 1
Job intvl setting at interruption copy
To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous output of the next job. Paper
interval becomes longer when starting pickup for the next job after the last sheet of the previous
job is delivered.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is delivered all.
2: Starting pickup for the next job after the previous job is delivered all. (For all jobs)
0
Set of landscape img rotn at PDL:tab ppr
To set whether to rotate landscape image by 180 degrees when PDL print is made on tab paper.
When 1 is set, image is rotated.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not rotated, 1: Rotated
0
ON/OFF Pause All Print Jobs button dspl
To set whether to display [Pause All Print Jobs] button on the Status Monitor/Cancel screen.
- Upon user's request
- When preferring to promptly stop the print job in operation or under reservation
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Charge target job set of dept mngm cntr
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the job type that advances the department management counter.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0:
PRINT category: Inbox Print, Report Print, PDL Print
COPY category: COPY
1:
PRINT category: Report Print, PDL Print
COPY category: COPY, Inbox Print
0
[For customization]
488
8. Service Mode