Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
PFWFTPRT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DDNSINTV
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
SIPAUDIO
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
SIPINOUT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
1
Set of RST reply at IP filter FTP SEND
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
When FTP SEND is executed using an IP filter by which packets from a specific remote PC are
rejected, SYN is returned to the port 113 if the PC supports authentication of the FTP port 113.
However, since the IP filter blocks the packets, the block logs are increased and the performance
is lowered.
When 1 is set, RST is returned to the port 113 without blocking packets.
When executing FTP SEND against the OS which supports authentication of the FTP port 113
while the IP filter is enabled
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
1
Set of DDNS periodical update interval
DNS registration is executed only once at start-up with the current iR, so the registered contents
are deleted in an environment where the DNS server settings are deleted at intervals.
To set the interval of DDNS periodical update for not deleting the registered contents.
When the DNS server settings are deleted at intervals
Enter the setting value, and then press OK key.
0 to 48
0: No periodical update, 1: 1-hour interval, 2: 2-hour interval, ..., 47: 47-hour interval, 48: 48-hour
interval
hour
24
2
Set of SIP session establishment order
To set whether to establish audio session or T.38 session first with SIP.
Usually, audio session followed by T.38 session is established when using IPFAX in an intranet
environment. However, this order is not specified by the standard.
Set 1 when connecting the SIP server or terminal where the session starts with T.38 session.
When connecting the SIP server or terminal where the session starts with T.38 session
Enter the setting value, and then press OK key.
When 1 is set, IPFAX fails with the destination where the session starts with audio session.
0 to 1
0: audio, 1: T.38
0
SIP: Session Initiation Protocol
2
Set of internal/external number to URI
To set whether to store the external number or the internal number in From URI when using NGN.
When a call cannot be made with external number while using NGN
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: External number, 1: Internal number
0
NGN: Next Generation Network
URI: Uniform Resource Identifier
474
8. Service Mode
Advertisement
Table of Contents
