Canon imageRUNNER ADVANCE 715 series Service Manual page 505

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
IFAX-OF 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
LDAP-DEF 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
FREE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Setting of I-Fax TX to entered address
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow I-Fax transmission to a newly entered address.
When 1 is set, I-Fax transmission is not available by entering the address because "I-Fax" is not
displayed on the transmission screen.
The addresses already registered in the Address Book can be used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
0 to 1
0: Allowed, 1: Prohibited
0
Initial condtn set of LDAP server search
To set initial condition for search target attribute that is specified at the time of LDAP server Details
search.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
0
COPIER> OPTION> USER> LDAP-SW
ON/OFF of charge disable screen
To set whether to display or hide the "Use Charge Management" screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily canceling the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the "Use Charge Management" screen in [Settings/Registration].
When enabling all the services to be provided for free by temporarily canceling the charging system
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Management Settings> Charge Management> Use Charge Management
495
8. Service Mode