Table of Contents
Advertisement
4. Select service mode > Copier > Function > MISC-P > RPT2USB; and then press OK.
NOTE:
• If the downloaded file is opened as plain text, the paragraphs are misaligned, which makes it difficult to read the data.
• When the file is dragged to WordPad, an image similar to the image output on paper may be displayed in some cases.
■ Moving the file in download mode
Preparation
The following item needs to be prepared to export the service print file to a USB flash drive.
• USB flash drive (FAT32 format file system that is not locked with a password. To display the USB menu, the said model's
firmware must already be registered.)
Overall flow
1. Selecting RPT-FILE
Select service mode > Copier > Function > MISC-P > RPT-FILE; and then press OK.
2. Generating report file
After the "ACTIVE" blinks for 3 to 4 minutes, generation of a report file is complete as "OK!" is displayed.
357
8. Service Mode
OK
Advertisement
Table of Contents
