Main Valve Disassembly/Assembly - Honda GoldWing GL1100 Service Manual

Frame and Suspension
On-Board Air Compressor System
(cont'd) - - - - - - - - - - - -
Attach the air hoses to the main valve and tighten to the
splacified torque,
hose,
clean ATF to the new
and install it on the
bolts
clean ATF to new and install the on
bolt and main valve.
clean
ATF
to
the D-rinos,
Connect the air hoses to the with
and to the splacified torque,
Install the gauge cluster ass:emibly onto the top com-
partment.
Connect the air hose from the drier and tighten the
bolt to the torque.
Install the top compartment on the frame and connect the
air hoses to the front and rear sus:pension.
Main Valve DisassemblylAssembly
Remove the valve and
SO I"!n CIS.
the valve button off with a screwdriver.
dean
ATF to the valves and
U-I·mOIS.
VALVE BODY
the screws. and
the valve button onto the holder
Install the valve holder
VALVE BUlTON
PLATE
Install the
V-I.III~ll"
onto the valves and install them into the
valve
Remove the screws and remove the valve holder
Clean the main valve body with cOlmpressed air and install
the into the valve
12..48