Lan Configuration Page - Manual Ethernet Configuration; Figure 56 - Lan Configuration Page - Manual Ethernet Configuration - Motorola PTP 600 Series User Manual

Use VLAN For Management Interfaces: This control can be configured with one of the
following three values:
x
No VLAN Tagging
x
IEEE 802.1Q Tagged (C-Tag, Type 8100)
x
IEEE 802.1ad Tagged (S-Tag or B-Tag, Type 88a8)
VLAN Management VID: This 802.1Q or 802.1ad VLAN ID (VID) will be included in packets
generated by the management interfaces. Valid settings are in the range 0 to 4094.
VLAN Management Priority: This 802.1Q or 802.1ad VLAN Priority will be included in
packets generated by the management interfaces. Valid settings are in the range 0 to 7.
VLAN Management VID Validation: If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured Management VID; otherwise packets with any
VID will be accepted.
8.3.1.4 LAN Configuration Page – Manual Ethernet Configuration

Figure 56 - LAN Configuration Page - Manual Ethernet Configuration

Force Configuration: This option allows the user to force the speed and duplex setting of the
Ethernet interface.
137
8 Web Page Reference