T O Change The Network Name And Wireless Guest Networks; Password - Motorola MG7315 User Manual

To change the Network Name and Password
1 Select and delete the old Network Name, then type in the new
Network Name.
2 Click the Save button.
3 You can click the Show Key box to check your typing for Password.
4 Select and delete the old Password, then type in the new Password.
5 Click the Save button.
Network Name can be from 6 ‐ 32 characters long. You can use the upper and lower
case letters (a – z and A – Z), numbers (0 ‐ 9) and special characters (e.g. $_/& etc.)
except the single quote ' .
Password can be from 8 ‐ 63 characters long. You can use upper and lower case letters
(a – z and A – Z), numbers (0 ‐ 9) and special characters (e.g. $_/& etc.) except the single
quote ' .
Be sure to write down and save the new wireless network name and
password in a place where you can easily find it. One approach is to write it
on a small piece of paper and tape it on the bottom of your cable modem.
Some people like to take a picture of the settings with their phone, which is
fine as long as long as they save it in a place where they are sure to find it
when they need it.