Task 7: Configure wireless interface
Updating quality of service
To configure the classification of priority encoded Ethernet frames into up to eight
traffic classes, proceed as follows:
Procedure 6-25 Update IP and Ethernet configuration for network
1
Select menu option System, Configuration, QoS Configuration. The
QoS Configuration page is displayed
2
Update the Priority Queue Mapping as required. The higher the queue
number the greater its priority. The default rules are shown in
3
To use IEEE 802.1Q classification rules, select Set Default 802.1Q
Priority Mappings. The 802.1Q rules are shown in
4
Select Submit Updated Values.
Figure 6-30 QoS Configuration page
6-48
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Chapter 6 Configuration and alignment
(Figure
6-30).
Table
6-8.
phn-0896_012v000
Table
6-8.
Jul 2010