Data rate calculations
Data rate calculations
This section provides instructions, tables and graphs to allow calculation of the data
rate capacity that can be provided by alternative PTP 600 configurations.
The following topics are described in this section:
•
Data rate defined
•
Calculation procedure and example
•
Data throughput capacity
•
Range adjustment curves
Data rate defined
The data rate capacity of a PTP link is defined as the maximum end-to-end Ethernet
throughput (including Ethernet headers) that it can support. It is assumed that
Ethernet frames are 1500 octet. Data rate capacity is determined by the following
factors:
•
Product variant (PTP 600 Full or Lite)
•
Link Symmetry
•
Link Mode Optimization (IP or TDM)
•
Modulation Mode
•
Channel Bandwidth
•
Link Range
4-114
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page
4-114
on page
on page
4-117
on page
4-128
Chapter 4 Reference information
4-115
phn-0896_012v000
Jul 2010