Init Blade Efi Setting - Hitachi Compute Blade 500 Series User Manual

Role
Server Blade
Parameters
<blade_no>
Slot number of server blade in the server chassis.
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Initializes the setting of BMC on the server blade 0.]
$ init blade bmc setting 0
Confirm? (y/[n]):y
I0048 : <Blade 0> Initializing was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
When this command is executed, BMC will automatically start up. SEL for a
communication error occurred between server blade SVP and BMC, IPMI over
LAN, may be collected, which has no problem.

init blade efi setting

Command
init blade efi setting [<blade_no>] [-F]
Description
Initializes the setting of EFI on the server blade.
2-42
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide