Console; Change Console - Hitachi Compute Blade 500 Series User Manual

S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

Console

change console

Command
change console {-s <sw_no>|-b <blade_no>} [-F]
Description
Changes the console connection to server blade or switch module.
Specify -s to connect to the switch module.
Specify -b to connect to the OS console on server blade.
In SMP configuration, specify the primary server blade to connect to the OS
console on the primary server blade.
Role
Server Blade (to connect server blade)
Switch Module (to connect switch module)
Parameters
-s <sw_no>
Slot number of switch module in the server chassis.
-b <blade_no>
Slot number of server blade in the server chassis.
-F
Executes the command without inquiry.
Range is from 0 to 3.
Only one module can be selected.
Range is from 0 to 7.
Only one server blade can be selected.
Specifies to connect to the OS console on server blade.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-315