Hitachi Compute Blade 500 Series User Manual page 323

Parameters
<blade_no>
Slot number of server blade in the server chassis.
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Show items
-- Blade efi backup info --
Slot
Slot number of server blade in the server chassis.
Range is from 0 to 7.
Bank<number>
Time of backup execution
Time uses "YYYY/MM/DD hh:mm:ss" format.
<number> shows the bank number to store backup data, ranging
from 0 to 4.
Serial Number
The format is S/N:xxxxxxxxxxxxxxxxxxxxxxxxxxx.
Appears when the firmware version of the management module is
A0280 or later
Message
None
Example
[Shows the list of the backup EFI settings of server blade 0.]
$ show blade efi backup 0
-- Blade efi backup info --
Slot
Bank0
0123456789ABCDEFGHIJKLMNOPQ
Bank1
0123456789ABCDEFGHIJKLMNOPQ
Bank2
0123456789ABCDEFGHIJKLMNOPQ
Bank3
0123456789ABCDEFGHIJKLMNOPQ
Bank4
0123456789ABCDEFGHIJKLMNOPQ
S0002 : Command succeeded.
S0000 : Command was finished.
$
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: 2015/11/06 18:01:00 S/N:
: 2015/11/06 18:00:00 S/N:
: 2015/11/06 17:59:00 S/N:
: 2015/11/06 17:58:00 S/N:
: 2015/11/06 17:57:00 S/N:
CLI command
2-305