$
Comment
None
show remote-access protocol http
Command
show remote-access protocol http
Description
Shows the setting of connection allowance of http.
This command is used to display the following items:
(1) Port number for HTTP connections
(2) Connection permission settings for IPv4 addresses
¢
¢
(3) Connection permission settings for IPv6 addresses
¢
¢
Role
Chassis
Parameters
None
Show items
-- HTTP setting --
Port number
Port number of protocol
Allow
IPv4 connection permission
Whether HTTP connections are permitted
Range of IP addresses to be permitted (network address and subnet
mask)
Whether HTTP connections are permitted
Range of IP addresses to be permitted (network address and prefix
length)
Range is from 1 to 65535.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-213