Hitachi Compute Blade 500 Series User Manual page 204

Parameters
-m <management>
Handling of the password expiration date
-p <expiry_period>
The period (number of days) while a password is available
-e <expired_login>
Event that occurs if the password expires
Show items
None
Message
None
Example
$ set user password policy -m enable -p 60 -e enable
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
2-186
Indicates whether the password used for login has an expiration date
or whether it can be used indefinitely.
enable : Set an expiration date for the login password.
disable : Allow the password to be used indefinitely.
If this is omitted, the setting does not change.
The specifiable range is 1 to 365.
1 to 365 : Time remaining until the password expires (number of
days).
This cannot be omitted if you change the value of "handling of the
password expiration date" from "disable" to "enable".
The specified value does not apply if you set the value of "handling of
the password expiration date" to "disable".
If this is omitted, the setting does not change if the value of "handling
of the password expiration date" is "enable".
enable : The user can change the expired password and then log in.
disable : The user cannot log in.
This can be omitted regardless of whether the value of "handling of
the password expiration date" is "enable" or "disable".
The specified value does not apply if the value of "handling of the
password expiration date" is "disable".
If this is omitted, the setting does not change when the value of
"handling of the password expiration date" is "enable".
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide