Hitachi Compute Blade 500 Series User Manual page 320

Description
Shows the list of backup data of server blade BMC, backup of all stored
generations. Backup data is automatically stored in the management module
and up to five-generation data is saved.
• Bank number to store backup data
• Backup time
Shows the list of backup data of a specified server baled regardless of
whether the server blade is in SMP configuration or not.
Role
Server Blade
Parameters
<blade_no>
Slot number of server blade in the server chassis.
Show items
-- Blade BMC backup info --
Slot
Slot number of server blade in the server chassis.
Bank<number>
Time of backup execution.
Serial Number
Message
None
2-302
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Range is from 0 to 7.
Time uses "YYYY/MM/DD hh:mm:ss" format.
<number> shows the bank number to store backup data, ranging
from 0 to 4.
The format is S/N:xxxxxxxxxxxxxxxxxxxxxxxxxxx.
Appears when the firmware version of the management module is
A0280 or later
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide