Set Power Dcmi-Mode - Hitachi Compute Blade 500 Series User Manual

S0000 : Command was finished.
$
Comment
None

set power dcmi-mode

Command
set power dcmi-mode -m <dcmi_mode> [-F]
Description
Sets DCMI mode for the entire chassis.
This setting applies to all server blades in the chassis.
If DCMI mode is enabled, a DCMI command can be used to set the upper
limit for power consumption of server blades. If a server blade does not
support DCMI commands, the server blade consumes rated power.
Role
Chassis
Parameters
-m <dcmi_mode>
Enabled or disabled DCMI mode
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Sets enabled the DCMI mode.]
enable : Enabled. (DCMI mode)
disable : Disabled. (APC mode)
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-205