Show Remote-Access Protocol Telnet - Hitachi Compute Blade 500 Series User Manual

S0000 : Command was finished.
$
Comment
None

show remote-access protocol telnet

Command
show remote-access protocol telnet
Description
Shows the setting of connection allowance of TELNET.
This command is used to display the following items:
(1) Connection permission settings for IPv4 addresses
¢
¢
(2) Connection permission settings for IPv6 addresses
¢
¢
Role
Chassis
Parameters
None
Show items
-- TELNET setting --
Allow
IPv4 connection permission
Network address
Network address
2-228
Whether TELNET connections are permitted
Range of IP addresses to be permitted (network address and subnet
mask)
Whether TELNET connections are permitted
Range of IP addresses to be permitted (network address and prefix
length)
allow: IPv4 connections are permitted.
deny: IPv4 connections are prohibited.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide