Hitachi Compute Blade 500 Series User Manual page 99

Address setting method
Displays the address allocation method.
Static address: Static address
Status
Status
Displays whether address settings are enabled.
enable: Enabled.
disable: Disabled.
IP address
IP address (IPv6)
----- : When the address setting is disabled
Prefix len
Prefix length
This is a value from 1 to 128.
----- : When the address setting is disabled
Default gateway
Default gateway (IPv6)
----- : When the address setting or the default gateway is disabled
Message
None
Example
[Shows management LAN (IPv6) of server blade 0.]
$ show blade mgmt-v6 setting 0
-- Blade management LAN setting (IPv6) --
Slot : 0
-- IPv6 address setting --
Allocation : Static address
Status : enable
IP address : fe80::200:87ff:feb2:c24
Prefix len : 64
Default gateway : fe80::200:87ff:feb2:c20
S0002 : Command succeeded.
S0000 : Command was finished.
$
show blade mgmt-v6 setting 1
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-81